DCP 100 Digital Cinema Processor

Features: QSC Digital Cinema Processor

Digital inputs for up to eight channels of audio
Network control and monitoring via SNMP
Serial automation control via RS-232
Analog Inputs for film processors, non-sync and Mic/line
Master volume and full 1/3 octave graphic EQ on all channels
Booth monitor with touch screen control for easy operation
Digital loudspeaker crossovers - three passive or bi-amp screen channels
Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control
Replaces the DCM-1, DCM-10 and DCM-10D for digital projection retrofits
Dual power supplies with load sharing for seamless operation in the event of failure
SD memory card for quick unit swap - restores all settings
Multiple bypass modes routes audio around failed components to insure that the show will go on
DCP Manager and DCPNet PC-based application for set-up, control and monitoring
DCP Connect mobile app for iPhone and Android provide control and monitoring capabilities via smart phone

DSP presets for DCS speakers for great "out of box" performance and reduced set-up time
Crossovers support three passive and active 2-way systems
Easily integrates with existing film processors for dual film/digital projection systems
Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
The DCP 100 is designed expressly for the needs of D-Cinema sound systems

SPECIFICATIONS	DCP 100 Digital Cinema Processor
Front Panel Controls
Power switch	Rocker switch
Mute control	Push button
Auditorium fader	Rotary encoder
Monitor volume/parameter adjust	Rotary encoder
Menu-driven LCD	Touch control LCD
Rear Panel Connectors
D-Cinema input	DB-25: AES3/EBU channels 1-8
Audio Formats	5.1, 5.1 EX, 7.1 DS
Analog input	DB-25: Analog audio channels 1-8
Universal Mic/Line input	XLR: Mic (+ phantom pwr) or line level
S/PDIF input	RCA: Stereo digital audio interface and Lt/Rt Matrix
RCA (L/R) inputs	RCA (two): Stereo Left and Right and Lt/Rt Matrix
Dataport outputs	HD-15 (eight): QSC amplifier interface
Automation inputs	2 x 6-pin Euro-style (six) digitally-sampled analog control inputs
Serial Control	DB-9 RS-232 serial interface
Logic output	4-pin Euro-style (two) outbound control
Relay outputs	6-pin Euro-style (two) outbound control
USB port	Config and management interface
Control RJ45	10/100 Mbps network management
SD card receptacle	Configuration memory card (1 GB min)
HI and VI Impaired Outputs
Output stage type	Single ended (balanced Z)
Output impedance	50 ohms
Nominal output level	-11.8 dBu (200 mV rms)
Loading requirements	R_MIN = 2 kΩ, C_MAX = 4 nF
Control Network
Protocol	Standard TCP/IP implementation over Ethernet or Fast Ethernet.
Data rate	10/100 Mbps
Connection requirements	Cat-5 UTP cable or better (100 m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN

Line voltage requirements	100–240 VAC, 50/60 Hz
Dimensions (HWD) inches	5.25 × 19 × 15.2
Dimensions (HWD) mm	133 × 483 × 386
Weight	16.6 lb (7.5 kg)