• Số 1B, dãy C, ngõ 24 Hoàng Quốc Việt, Cầu Giấy, Hà Nội
  • info@bachvietpro.vn
  • 0913.336.993
Bachvietpro

DCP 100 Processor

Liên hệ

Features: QSC Digital Cinema Processor

  • Digital inputs for up to eight channels of audio
  • Network control and monitoring via SNMP
  • Serial automation control via RS-232
  • Analog Inputs for film processors, non-sync and Mic/line
  • Master volume and full 1/3 octave graphic EQ on all channels
  • Booth monitor with touch screen control for easy operation
  • Digital loudspeaker crossovers - three passive or bi-amp screen channels
  • Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control
  • Replaces the DCM-1, DCM-10 and DCM-10D for digital projection retrofits
  • Dual power supplies with load sharing for seamless operation in the event of failure
  • SD memory card for quick unit swap - restores all settings
  • Multiple bypass modes routes audio around failed components to insure that the show will go on
  • DCP Manager and DCPNet PC-based application for set-up, control and monitoring
  • DCP Connect mobile app for iPhone and Android provide control and monitoring capabilities via smart phone
  • DSP presets for DCS speakers for great "out of box" performance and reduced set-up time
  • Crossovers support three passive and active 2-way systems
  • Easily integrates with existing film processors for dual film/digital projection systems
  • Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
  • The DCP 100 is designed expressly for the needs of D-Cinema sound systems

SPECIFICATIONS

DCP 100 Digital Cinema Processor

Front Panel Controls

Power switch

Rocker switch

Mute control

Push button

Auditorium fader

Rotary encoder

Monitor volume/parameter adjust

Rotary encoder

Menu-driven LCD

Touch control LCD

Rear Panel Connectors

D-Cinema input

DB-25: AES3/EBU channels 1-8

Audio Formats

5.1, 5.1 EX, 7.1 DS

Analog input

DB-25: Analog audio channels 1-8

Universal Mic/Line input

XLR: Mic (+ phantom pwr) or line level

S/PDIF input

RCA: Stereo digital audio interface and Lt/Rt Matrix

RCA (L/R) inputs

RCA (two): Stereo Left and Right and Lt/Rt Matrix

Dataport outputs

HD-15 (eight): QSC amplifier interface

Automation inputs

2 x 6-pin Euro-style (six) digitally-sampled analog control inputs

Serial Control

DB-9 RS-232 serial interface

Logic output

4-pin Euro-style (two) outbound control

Relay outputs

6-pin Euro-style (two) outbound control

USB port

Config and management interface

Control RJ45

10/100 Mbps network management

SD card receptacle

Configuration memory card (1 GB min)

HI and VI Impaired Outputs

Output stage type

Single ended (balanced Z)

Output impedance

50 ohms

Nominal output level

-11.8 dBu (200 mV rms)

Loading requirements

RMIN = 2 kΩ, CMAX = 4 nF

Control Network

Protocol

Standard TCP/IP implementation over Ethernet or Fast Ethernet.

Data rate

10/100 Mbps

Connection requirements

Cat-5 UTP cable or better (100 m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN

 

Line voltage requirements

100–240 VAC, 50/60 Hz

Dimensions (HWD) inches

5.25 × 19 × 15.2 

Dimensions (HWD) mm

133 × 483 × 386

Weight

16.6 lb (7.5 kg)

Bình luận