Provides Monitor and Crossover functions in one box
Digital Signal Processing for state-of-the-art sound quality (high dynamic range)
Fast system setup time (especially in megaplexes with similar rooms)
Simple connections with QSC DataPort connectivity. Only one cable per amplifier needed (contains two signal inputs, two signal returns, power on/standby control and two channels of load monitoring)
Exclusive "Load Fault" detection indicates speaker system or wiring faults
Simple crossover adjustments via PC with password control for tamper proof system adjustments
Lower system cost than existing quad-amp solutions
Compatible with all current sound formats; 3 to 5 screen channels, 5.1 - 7.1
3 year warranty plus optional 3 year extended service contract
SPECIFICATIONS
Dimensions (HWD)
19 x 5.25 x 15
Line Voltage Requirements
100 VAC - 240 VAC, 50/60 Hz
Acessories Included
(1) 6 ft. (2m) UL/CSA line cord (1) user manual (1) software CD
Front Panel Controls
Power Switch
(1) rocker switch
Monitor Mode Select
(1) momentary push button
Monitor Channel Select
(9 or 11) momentary push buttons
Monitor Volume
(1) rotary potentiometer
Test Lead Connections
(2) test point jacks
Bypass Mode Select Switch
(1) slide switch
Indicators
Power Indicator
(1) green LED
Monitor Mode Indicators
(1) green LED and (1) yellow LED
Processor Channel Indicators
(9 or 11) green LEDs
Amplifier Channel Indicators
(9 or 11) yellow LEDs
Load Fault Indicator
(1) red LED
Clip Indicator
(1) red LED
Bypass Mode Indicator
(1) flashing red LED
Alt EQ Mode Indicator
(1) yellow LED
Rear Panel Controls
Bypass Crossover Level
(2 or 3) rotary trimpots
Bypass Crossover Type
(1) slide switch
Analog/Digital Input Select
(1) slide switch
Rear panel control connectors
Main Analog Input
(1) 25 pin female D-sub connector
Surround EX Input
(1) 25 pin female D-sub connector
Digital Input
(1) 25 pin female D-sub connector
Amplifier DataPorts
(10 or 19) 15-pin female high-density D-sub connectors
Control Port
(1) USB series-B receptacle
Hearing Impaired Line Output
(1) 3 position screw-terminal connector
Powered Sub Line Output
(1) 3 position screw-terminal connector
External Monitor Speaker Output
(1) 2 position screw-terminal connector
Aux Line Level Input
(1) 3 position screw-terminal connector
Alt EQ Contact Closure Input
(1) 2 position screw-terminal connector
AC Power Inlet
(1) IEC style
DCM Inputs
Input Stage Type
Active balanced
Input Impedance
20k ohms
Maximum Analog Input Level
+14.2 dBu (4.0 Vrms)
A/D Conversion
24 bit delta-sigma 128x oversampled
Dataport Outputs - Screen Channels
Output Level Range
+6 dB to -18 dB in 0.1 dB steps
Dynamic Range
> 103 dB
THD+N, AES-17, 20 Hz-20 kHz, +12 dBu input level, all filters set flat
Features: QSC Digital Cinema Monitor Processor
SPECIFICATIONS
Dimensions (HWD)
19 x 5.25 x 15
Line Voltage Requirements
100 VAC - 240 VAC, 50/60 Hz
Acessories Included
(1) 6 ft. (2m) UL/CSA line cord
(1) user manual
(1) software CD
Front Panel Controls
Power Switch
(1) rocker switch
Monitor Mode Select
(1) momentary push button
Monitor Channel Select
(9 or 11) momentary push buttons
Monitor Volume
(1) rotary potentiometer
Test Lead Connections
(2) test point jacks
Bypass Mode Select Switch
(1) slide switch
Indicators
Power Indicator
(1) green LED
Monitor Mode Indicators
(1) green LED and (1) yellow LED
Processor Channel Indicators
(9 or 11) green LEDs
Amplifier Channel Indicators
(9 or 11) yellow LEDs
Load Fault Indicator
(1) red LED
Clip Indicator
(1) red LED
Bypass Mode Indicator
(1) flashing red LED
Alt EQ Mode Indicator
(1) yellow LED
Rear Panel Controls
Bypass Crossover Level
(2 or 3) rotary trimpots
Bypass Crossover Type
(1) slide switch
Analog/Digital Input Select
(1) slide switch
Rear panel control connectors
Main Analog Input
(1) 25 pin female D-sub connector
Surround EX Input
(1) 25 pin female D-sub connector
Digital Input
(1) 25 pin female D-sub connector
Amplifier DataPorts
(10 or 19) 15-pin female high-density D-sub connectors
Control Port
(1) USB series-B receptacle
Hearing Impaired Line Output
(1) 3 position screw-terminal connector
Powered Sub Line Output
(1) 3 position screw-terminal connector
External Monitor Speaker Output
(1) 2 position screw-terminal connector
Aux Line Level Input
(1) 3 position screw-terminal connector
Alt EQ Contact Closure Input
(1) 2 position screw-terminal connector
AC Power Inlet
(1) IEC style
DCM Inputs
Input Stage Type
Active balanced
Input Impedance
20k ohms
Maximum Analog Input Level
+14.2 dBu (4.0 Vrms)
A/D Conversion
24 bit delta-sigma 128x oversampled
Dataport Outputs - Screen Channels
Output Level Range
+6 dB to -18 dB in 0.1 dB steps
Dynamic Range
> 103 dB
THD+N, AES-17, 20 Hz-20 kHz, +12 dBu input level, all filters set flat
< 0.013% (Analog inputs)
< 0.008% (Digital inputs)
Frequency Response
20 Hz-20 kHz (no filtering)
D/A Conversion
24 bit delta-sigma 128x oversampled
Filter Topology
24 bit digital IIR filters
Crossover Filters
Linkwitz-Riley 24 dB/octave digital filters programmable from 20 Hz to 20 kHz
Parametric EQ
(3 per channel + 3 per band)
Digital bandpass with ±10 dB of boost/cut programmable from 20 Hz to 20 kHz. Q is programmable in 1/10th octave steps from 1/10 to 2 octaves
CD Horn EQ
Digital shelf filter with up to 6 dB of boost programmable from 1 kHz to 20 kHz. Available on high frequency band only
Screen EQ
Digital shelf with up to 6 dB of boost programmable from 1 kHz to 20 kHz
Subsonic (highpass) Filter
Digital high pass filter programmable from 15 Hz to 50 Hz Q can be programmed as 0.707 (flat) or 2 (B6 boost)
Allpass Filter
2nd order allpass filter programmable from 20 Hz to 2000 Hz (dual low band output only)
Band Delay
Programmable in 21 μs steps from 0 to 10 ms per band
Channel Delay
Programmable in 1 ms steps from 0 to 20 ms
Polarity
Normal, Inverted
Mute
Individual mutes on each channel and band output
Dataport Outputs - Surround and Subwoofer
Output Level Range
+6 dB to -18 dB in 0.1 dB steps
Dynamic Range
> 103 dB
THD+N, AES-17, 20 Hz-20 kHz, +12 dBu input level, all filters set flat
< 0.013% (Analog inputs)
< 0.008% (Digital inputs)
Frequency Response
20 Hz-20 kHz (no filtering)
D/A Conversion
24 bit delta-sigma 128x oversampled
Filter Topology
24 bit digital IIR filters
Parametric EQ
(2 per channel)
Digital bandpass with ±10 dB of boost/cut programmable from 20 Hz to 20 kHz. Q is programmable in 1/10th octave steps from 1/10 to 2 octaves
Subsonic (highpass) Filter
Digital high pass filter programmable from 15 Hz to 50 Hz Q can be programmed as 0.707 (flat) or 2 (B6 boost)
Channel Delay
Programmable from 0 to 150 ms per output (surrounds only)
Mute
One mute for all subwoofer outputs, one per surround channel
Bass Management
Weighted sum of screen channels may be low pass filtered and mixed with sub output
Dataport Outputs - Aux
Output Level Range
+6 dB to -18 dB in 0.1 dB steps
Dynamic Range
> 103 dB
THD+N, AES-17, 20 Hz-20 kHz, +12 dBu input level, all filters set flat
< 0.013% (Analog inputs)
< 0.008% (Digital inputs)
Frequency Response
20 Hz-20 kHz (no filtering)
D/A Conversion
24 bit delta-sigma 128x oversampled
Filter Topology
24 bit digital IIR filters
Crossover Filters
Linkwitz-Riley 24 dB/octave digital filters programmablefrom 20 Hz to 20 kHz
Parametric EQ
(3 per channel + 3 per band)
Digital bandpass with ±10 dB of boost/cut programmable from 20 Hz to 20 kHz. Q is programmable in 1/10th octave steps from 1/10 to 2 octaves
Subsonic (highpass) Filter
Digital high pass filter programmable from 15 Hz to 50 Hz Q can be programmed as 0.707 (flat) or 2 (B6 boost)
CD Horn EQ
Digital shelf filter with up to 6 dB of boost programmable from 1 kHz to 20 kHz. Available on high frequency band only
Screen EQ
Digital shelf with up to 6 dB of boost programmable from 1 kHz to 20 kHz
Channel Delay
Programmable from 0 to 20 ms per output
Band Delay
Programmable in 21 μs steps from 0 to 10 ms per output
Mute
Individual mutes on each channel output
Surround Bass Management
Weighted sum of surround channels may be low pass filtered and mixed with aux output
Amplifier AC Control
All amps power on with DCM activation
Emergency Bypass Crossover
Filter Type
2nd order active Butterworth, 2 or 3 way
Attenuation Range (trimpot)
0 dB to -20 dB
Crossover Frequency
1000 Hz (2-way), 500 Hz & 1500 Hz (3-way)
Powered Subwoofer Output
Output Stage Type
Single ended (balanced impedance)
Output Impedance
50 ohms
Maximum Output Level
+14.8 dBu (6Vp = 4.25 Vrms)
Loading Requirements (total of remote & dataport connection)
RMIN = 2k ohms CMAX = 4 nF
Monitor Speaker Output
Amplifier Output Power
15 watt Class D amplifier
Frequency Response
20 Hz-20 kHz (±2 dB)
Dynamic Processing
1.5:1 Compression
Aux Input
Input Stage Type
Active Balanced
Input Impedance
20k ohms
Maximum Input Leve
+14.2 dBu (4.0 Vrms)
Hearing Impaired Output
Output Stage Type
Single ended (balanced impedance)
Output Impedance
50 ohms
Nominal output Level
-11.8 dBu (200 mVrms)
Loading Requirements
RMIN = 2k ohms CMAX = 4 nF
Contact Closure Input
Input Type
TTL Compatible or Dry Contact Closure
Operating Mode
Connection to ground through a maximum impedance of 1.3k ohms selects alt EQ settings
Internal Monitor Speaker
Dimensions
4-inch full range driver
DCP 100 Processor
DCP 300 Processor
DCA 2422 khuyếch đại âm thanh
DCA 1622 khuyếch đại âm thanh